Tag: sports bra

Delphi Sports Bra

Who can resist a fun new sports bra? Especially with options for a super cute infinity, twist, or simple back design. I am all over trying new sports bra patterns, and the infinity strap design is just so unique and fun.

I don’t limit myself when it comes to wearing sports bras. They get worn to the gym, as a swim top at the beach and in the pool, and for everyday wear. They also get worn with shorts when I skate around my neighborhood, because that is #floridalife. 🙂

The Delphi Sports Bra pattern calls for athletic fabric. I used nylon/spandex Supplex and nylon/spandex Align 2 for my two bras. You could add powernet if you wanted, but I found that the compression and firmer rebound of Supplex and Align 2 were adequate for me. (For reference, I wear and buy a size 32D bra at Soma.)

I wore one of my freshly made bras all day yesterday and it was super comfortable. The straps stay in place, and the neckline depth is perfect. It’s high enough to be supportive, but low enough to not show under a scoop or V-neck top.

You can use 3/8″ or 1/2″ elastic in the straps. Although the pattern calls for 1-1/2″ or 2″ elastic in the band, because I am rather short-waisted (which seems weird for a tall girl, right?) I chose to use 1″ elastic in my band. Of course that meant adjusting my band height to 2-7/8″, but I love being able to personalize a pattern to fit my body. That’s one of the reasons that I sew my own clothes.

Greenstyle has once again nailed it on a fun, great-fitting, well-designed pattern with the Delphi Sports Bra. It doesn’t take a huge amount of fabric, and can be worn with shorts, skirts, leggings, and under your favorite top. Sizing ranges from 32″ to 61″ at the full bust. If you need it, there are 2″ and 4″ full bust adjustment pattern pieces for the front.

The details:

The Delphi Sports Bra pattern is one of the many awesome patterns by Greenstyle. I had some plum Supplex from Phee Fabrics in my stash for the first Delphi Bra I made. The teal Align 2 for my second bra was purchased from Greenstyle a while back. Although this particular color is no longer available, they have lots of pretty colors in stock. I also recommend the Signature fabric line, which is another high quality nylon/spandex athletic fabric.

For reference, I made a size C1 with the plum supplex. For the second bra, I again used size C1, but cut the front in size B2 width (keeping the C1 length), which feels more comfortable for my shoulder width and at the armscye. I dislike anything being too close in the armscye, and this combination works perfectly for me.

I can’t remember which pattern I used for the swim bottoms, but the Delphi Sports Bra is also shown worn with the Windward Shorts and Tidal Skirt, blogged here and here.

I purchased my 1/2″ and 1″ knit elastic at Wawak, along with the Maxi-Lock serger thread. There are steps in the pattern that I highly recommend using your sewing machine to stitch, such as the side seams, and attaching the back infinity straps. It’s also important to trim those seams to reduce bulk and help them lay more smoothly when turned out to the right side. I drive a Bernina sewing machine and LOVE it! Other seams and the cover-stitching on the straps were done on my Babylock Triumph, which I also love.

I cannot stress strongly enough how much easier and more fun it is to sew when you use high quality patterns, fabrics, and machines. It isn’t that you can’t sew with a cheaper machine, because I sewed for decades on much, much less expensive machines. But once I had saved enough money to purchase my current machines, I really feel like the quality of my work, and ease of sewing (due to less frustration with machine capacity, bobbin struggles, lack of foot height, and motor strength) has greatly improved.

Thank you for reading and sharing my love of patterns, sewing, fabric, and cute sports bras! The links to GreenStyle may be affiliate links (if I did them properly!) which means that I may earn a few pennies if you use my links without it costing you anything extra. Since this is my blog and represents me, I always give my honest opinion about any patterns, fabric, or supplies that I talk about. I do like knowing whether the time I spend writing posts actually interests people enough that they take a look at the patterns I review, but I write for me. It’s one more creative pursuit that I hope is helpful or interesting to others. I write to share my love of sewing and to encourage others to love it as much as I do! ❤

Hack Your Style: Endurance Sports Bra

Made More Fun/Challenging With An Upcyle

Sports Bras are kind of a staple in a lot of women’s wardrobes. Whether you wear them for sports, exercise, work, or just because they’re cute and comfortable. The challenging part is finding one that fits properly. Ready to wear sports bras often only come in basic sizes like XS, small, medium, large, and XL. While sizing like that may give an okay fit on some people, I think that it is unlikely to get a great fit with such limited sizing. Which is why I like making my own.

I started making GreenStyle Endurance Sports Bras this summer, and now have three, customized for my style. Funnily enough, none of them are made exactly per pattern directions with a front zipper and bound edges. What can I say? I’m no stranger to pattern hacking, and think it’s fun to try different looks by playing with a pattern.

The great thing about the Endurance bra pattern is that it has specific band and cup sizing. It’s designed to fit a full range of band sizes 28-40, and cup sizes B-H. You get a much better fit when you have cup size options! Speaking of fit, following the measurement chart is the best way to choose your size. My 32″ underbust (ribcage) measurement put me in a 32 band, and my full bust measurement put me in the E cup. The band is a good fit, but I neglected to take into account that the pattern cup pieces are intended to fit over bra foam pieces formed into cups, and I was not using the bra foam layer. So, the 32E sports bra fits, but it’s not snug. I don’t know about you, but I like my sports bras to fit snugly.

It’s still super cute, and I wear it all the time, but I knew that a 32D would fit better, at least with the way that I hack the pattern to use powernet basted to the wrong side of the main fabric, rather than using bra foam. So I made my second Endurance in a 32D.

As you may have noticed, beyond hacking the pattern to not use foam, binding, or a zipper, I also changed the straps. Rather than using the all one piece upper cup and strap, I trimmed the strap off about 3/8″ above where the strap starts. Since my bust is fuller at the bottom than the top, I also trimmed back the curve at the armscye.

I don’t show full pattern pieces out of respect for pattern designers hard work, but you can see where I trimmed off the strap and trimmed back the upper portion of the upper cup piece.

I thought it would be fun to have double straps, so I made straps out of 1-1/2 wide strips of fabric folded in half right sides together, zig-zagging over 3/8″ wide knit elastic that was aligned with the raw edge of the fabric, so that the zig just goes off the edge of the elastic and into the middle of the fabric, with the zag into the elastic, then turning the straps right side out and pressing.

The V and straight combination of straps is a unique look, along with providing additional support.

I basted two straps at center back, and placed the other two straps at 2-1/2″ away. After sewing the main and lining together along the top edges (except at the strap opening) and turning right side out, I tried the bra on to judge strap lengths. The center V straps ended up about 15″ long, and the straight straps about 14″ long. The length you need may vary depending upon the stretchiness of your elastic. I threaded the two straps on each side through sliders because it looked cute, and to give a slight amount of adjustability.

Aren’t the sliders a fun touch? And aren’t I lucky to have such a great wingman to ride along with me as I skate?

For my second Endurance I used size 32D, and again just sewed the center front together rather than using a zipper. For this version I made straps with 1″ wide knit elastic threaded through them.

The 1″ wide straps give great support!

Instead of skating around the neighborhood like I usually do, we decided to check out a county trail system. It was a workout with the little hills and elevation changes, but fun to have a change of scenery and to see the bicyclists and walkers that use the trail.

The trail is paved, and there are benches along the side every so often. It does cross quite a few busy streets though, so there are 4 way stops. You really have to watch for cars because they have a tendency to do more of a “rolling stop” than a complete stop.

The straps are just crossed in the back for a typical X back look.

Florida sun is intense, so don’t forget the sunscreen!

My new outfit (because of course I *needed* another outfit for skating) is an upcyle. I used some old capri length leggings and a workout top that was too big, unpicking them to salvage the pretty fabric. Working with limited fabric means that you’re going to get a scrappy look, but I tried to get intentional with it.

I managed to get the GreenStyle Moxi bike shorts front and back pieces, along with the Endurance Sports Bra cup pieces out of the capris. The old waistband fabric wasn’t as tall as the Moxi waistband, so the bottom 2″ of waistband was cut from the old teal workout top. Using the teal for the band of the Endurance bra gave it a nice contrast. I had to dig into my stash to cut the lining layer of the bra, along with the side panels of the shorts. The pockets were cut from the mesh panel that was in the center back of the old top. Like I said, it’s a scrappy look!

Looking scrappy (and happy) because I got to skate.

I love the support the bra offers, and the fact that it can double as a swim top. The V and straight straps are my favorite, so I used them on this bra too.

It’s fun to provide entertainment value by trying to take photos with cars occasionally driving by! 🙂 All you can do is laugh when someone rolls down their window and says, “Looking good!”

Reverse triple coverstitching helped soften the look of the multiple fabrics and bring them together. Superior Threads Sergin’ General thread in teal was a great match to the fabrics.

Don’t be afraid to upcycle, to hack, to adjust, to experiment, and to play with patterns and fabric. I also encourage you to rollerskate for fun and exercise. Even if it’s been a while, you’ll pick it back up. And like anything else, the more you practice, the better you get.

The details: I’m wearing the GreenStyle Endurance Sports Bra and the bike shorts from the GreenStyle Moxi Shorts pattern in all these photos. The navy and turquoise floral print is Align 2 fabric from GreenStyle.

Both the turquoise and purple shorts are supplex from Phee Fabrics.

The swirly print fabric used for the X back bra was secondhand fabric so I don’t have any information on where it’s from.

The rainbow finish sliders used on the double straps were purchased from Porcelynne.

You can make your own sports bra, and can customize it to fit your needs. It’s worth the sew! And a few more photos just because I have so many to share. 😉

Thank you for reading and sharing my love of creating, hacking, sewing, serging, great patterns, fabric, and making beautiful, well-fitting garments! ❤

The links to Greenstyle may be affiliate links, which means that at no extra cost to you, I may receive a few pennies if you purchase through my link. As always, I only give my honest opinion. After all, it is my blog, which represents me!