upcycling – Sew Beach Life

All About The Azure

Greenstyle has been knocking it out of the park with new patterns, and the Azure Top and Dress is another winner! There are options galore with crew, scoop and V-necklines; narrow or wide tanks; cap, short, full, or long sleeves; crop, high hip, or low hip tops; and a super cute dress with elastic in the back for shaping.

When you make three tops and a dress, it’s a sure sign that you love a pattern! 🙂 My first make is a V-neck narrow tank in the high hip length. When I texted my daughter a photo to show her how cute it is, she said she “loves the modern length on me.” Hahahahahahahaha! Obviously I have not been wearing tops with a modern length! She’s not wrong. After losing some weight, most of my tanks and tops are big, baggy, and too long on me. So I really needed to make some new ones!

I love the V-neck, I love the drapiness of rayon spandex for this style, and the narrow tank width is perfect for my shoulder width.

Since those style choices worked so well the first time, my second make is another V-neck narrow tank in high hip length.

This green rayon spandex is a bit heavier weight than the cheetah print, and as usual for testing, the pattern was updated slightly to fit a little slimmer at the armscye and bust. This top may look a little snug at the bust, but it is super comfortable and will fit an average bust quite nicely.

All of my makes are a size E graded out to size F. My upper bust is 33″, which is the smallest end of size E. My full bust is 37″, the largest measurement for size E, so right on the edge of needing an FBA. Because Greenstyle is awesome, they include a +2″ FBA option in the pattern. 🙂

Which leads me to the third V-neck narrow tank in high hip length, made using the +2″ FBA front pattern piece. Along with a bit of width at the bust, the FBA adds length to the center front, which is super helpful for those of us with a lot of bust projection. Although I don’t mind the slightly high low look of my first two tanks, my FBA make has a more level hemline.

This tank is an upcycle made from an old RTW dress. Although the fabric is a polyester spandex (if you know or follow me, I’m not generally a fan of polyester) the print and colors were too fun for me to ignore.

Polyester spandex doesn’t have quite as nice a drape as rayon spandex, but it still works well for this pattern. I wore this outfit all day while playing with my granddaughters. The six year old and I went roller skating around the neighborhood and I was so comfortable that I didn’t even think about my clothes.

Photo courtesy of my six year old granddaughter.

I love that the “modern” 😉 high hip length keeps my belly covered even with arms raised overhead. One of these days I might try the crop length, because it would look super cute with a Paseo Skirt…

After seeing the cute Azure dresses during testing, it was impossible to not make one. The back elastic just gives it such pretty shaping.

The length is perfect! Short enough to be cool and breezy (because let’s face it- Florida is hot and humid for most of the year), but long enough to wear to Mass.

The back elastic not only provides shaping for the front of the dress, but helps it lay smoothly and comfortably against your back.

If you’re nervous about sewing an elastic casing on stretchy knit fabric, I’ve got great tips for you. First, make sure you mark your casing lines (on the wrong side of the fabric) with a high contrast color. I like using tracing paper and a tracing wheel. Then press up both long sides of the casing.

My (not so) secret weapon for keeping the casing from stretching or shifting out of place when sewing is Wash Away Wonder Tape.

Place a strip of Wash Away Wonder Tape along both pressed up edges of the casing. Flip the casing over so that the wrong side of the casing lines up with the marked lines on the wrong side of the dress back.

Start peeling the paper backing off the strip on the top edge of the casing, then use your hands to press it in place along the top marked line. Once the casing is perfectly aligned and pressed into place, do the same with the bottom edge.

My sweet kitty likes to be close by while I’m sewing. He lounges on a chair while I cut or do prep at the dining table, then follows me into the sewing studio when I sew. ❤

The Wash Away Wonder Tape will keep the casing perfectly in place for stitching. What you may have thought of as a challenging step becomes super easy, and you don’t even need to worry about using or pulling pins when you sew the casing in place!

Maybe this winter I’ll try a version with sleeves, but for now the V-neck and narrow tank options are perfect for both the top and dress.

My favorite fabric for both the tank and dress is of course rayon spandex, because I love that fabric blend for pretty much any knit tank, tee, or dress I make.

But I have to admit that the polyester spandex blend worked well too.

Whether you’re working, playing, walking through the woods or just stopping to smell the roses, the Azure Top and Dress will keep you comfortable on your journey.

The details: the Azure Top and Dress is a new pattern from GreenStyle Creations. It comes in sizes B-M (full bust of 30″ to 61″ and hips of 32″ to 62″) and has options galore for the neckline, tank styles, and sleeve options, with three top lengths (plus a dress length!)

I purchased the rayon spandex cheetah print from Mood Fabrics, and wore my tank with bike shorts from the Moxi Shorts pattern.

I purchased the green rayon spandex from Phee Fabrics, and wore it with my Windward Shorts (you can read all about them here.)

I upcycled the teal and purple polyester spandex fabric, and wore the FBA version of the tank with Moxi bike shorts.

The blue rayon spandex for the dress was purchased from Phee Fabrics. The Wash Away Wonder Tape and the 1″ knit elastic used for the back elastic casing were purchased from Wawak.

No matter what options you choose, I am definitely all about the Azure!

The links to GreenStyle may be affiliate links (if I did them properly!) which means that I may earn a few pennies if you use my links without it costing you anything extra. Since this is my blog and represents me, I always give my honest opinion about any patterns, fabric, or supplies that I talk about. I hope the time I spend writing posts actually interests people enough that they take a look at the patterns I review. I write to share my love of sewing, fabric, patterns, and notions, and hope that sharing helpful tips encourages others to love sewing as much as I do! 🙂

Skirt? Skort? Either Way It’s A Great Look!

Love the easy breezy comfort of a skirt? Me too, especially when it has super cool optional front pockets, along with the option of back welt pockets. The thing that makes it even better are the optional undershorts, with or without side panel pockets. The GreenStyle Paseo Skirt pattern is perfection!

I love this pattern so much that I made three versions, all of them a bit different. (I would have made more before posting, but a home project left me with little sewing time). The blue shorter pencil skirt has the optional undershorts with side panel pockets. It’s made of a heavier weight nylon spandex swim, and I love it!

The side panel shorts pockets are a perfect size, wide and deep enough for a large iPhone. Did I mention that the undershorts have two length options? I made the shorter length. It’s super awesome to have attached shorts in case you break into spontaneous cartwheels 😉 or have children (or grandchildren) to chase after and play with.

My top slid up, the skirt slid up slightly, but the shorts stayed perfectly in place! Even the bird flying by (see the wing behind me?) was impressed. 😉

My teal long pencil skirt with no pockets or shorts was a super quick sew. It is scuba, upcycled from a no longer worn dress. Because the scuba didn’t have the greatest recovery, I used nylon spandex supplex from GreenStyle for the waistband.

The longer length pencil skirt is perfect for church or work. My only regret is not adding the front pockets. But being an upcycle, I was working with limited fabric. All future versions are going to have pockets! It really doesn’t take much longer to make the pockets.

This skirt is so comfortable and easy to wear all day, I wish I could say the same for the high heels! 🙂 Back in the day, heels were no big deal. Apparently I’ve reached the stage of life where Birkenstocks rule the day.

I just feel so fancy in this skirt! Obviously, I need more in my closet.

The third skirt I’m sharing is technically the first one I made. I’d made it as the longer length straight skirt with front pockets, using a stretch cotton twill panel from Mood Fabrics, taking the time to carefully match the border print at the side seams and at the front pockets. I’d chosen to make the straight skirt because I was sure that the pencil skirt would be too form fitting on me. Boy, was I wrong!

It was cute, but a bit longer and straighter than I wanted for a summer skirt. For reference, below is a photo from testing to see the longer length straight skirt. Keep in mind that it didn’t yet have a waistband on it.

Looking at the other pattern testers photos, I just loved the cut of the pencil skirt. So I unpicked the side seams and back waist darts and cut it down to the short pencil skirt. The updated version of the pattern (that’s why patterns get tested, to perfect every tiny detail!) has curved back darts, and it fits so smoothly with no bumps at the end of the dart. I’m very happy that I chose to cut it down to the shorter pencil option, as I think it’s a more flattering look on my body shape.

The skirt fits great, but since I’ve lost weight the Waimea Rashguard Top I made a few years ago is getting a bit big and baggy on me.

It’s important to use a knit fabric with good recovery for the waistband, since this is a pull-on skirt with no zipper. There are options for a mid or high rise waistband. The mid rise worked great for me. Since I like being able to carry my heavy phone in a pocket, I generally add 1/4″ clear elastic when serging the top seam of my waistbands together. Feed the elastic (grippy side down) through the slots on the presser foot. Your waistband pieces are right sides together. Once you’ve got everything aligned, lower the presser foot, ensuring that you can see that the elastic is back to where the needles will catch it.

Using a four thread overlock with a stitch length of 2, stitch width on M, and the differential at 1.3, serge around the top of the waistband. You don’t need to stretch or pull on the elastic. If you do, the elastic will end up a bit too tight, giving the dreaded “muffin top” look. Just gently let it feed through your fingers and let the machine do the work.

I love all three of the Paseo Skirts I made, and can’t tell you which is my favorite. Which one do you like the best?

The details:

The Paseo Skirt from GreenStyle Patterns comes in sizes B-M (hip sizes 32″-62″) with pencil or straight options, shorter or longer lengths, an optional flounce, an optional curved faced hem, optional front pockets and/or back welt pockets, a mid or high rise waistband, and optional undershorts in two lengths that can be plain or have side pocket panels. Whew, I think I listed all the options! I love patterns with a lot of versatility. They make me feel like I really get my money’s worth because I can make dozens of skirts and they can all look a little bit different.

My blue skirt is nylon spandex swim purchased as a destash from Ragamuffin Fabrics. I wore it with a blue modal Leeward Tank, you can read the post here.

The teal skirt is upcycled scuba, with a mid rise waistband made of supplex from GreenStyle Fabrics. It was worn with a black rayon spandex Staple Tank (read post here) tied in a knot.

The border print skirt is a stretch twill panel (with not-quite-enough stretch) from Mood Fabrics. Fortunately, I am on the very bottom edge of my size range and it works. You’ll want to pay attention to the fabric stretch requirements, especially for the waistband. You can read more about the Waimea Rashguard top worn with it here.

This is one of my favorite patterns, and will be made again and again. It’s perfect for traveling and wearing out and about. GreenStyle has knocked it out of the park again!

The links to GreenStyle may be affiliate links (if I did them properly!) which means that I may earn a few pennies if you use my links without it costing you anything extra. Since this is my blog and represents me, I always give my honest opinion about any patterns, fabric, or supplies that I talk about. I do like knowing whether the time I spend writing posts actually interests people enough that they take a look at the patterns I review, but I write for me. It’s one more creative pursuit that I hope is helpful or interesting to others. I write to share my love of sewing and to encourage others to love it as much as I do! 🙂

Hack Your Style: Endurance Sports Bra

Made More Fun/Challenging With An Upcyle

Sports Bras are kind of a staple in a lot of women’s wardrobes. Whether you wear them for sports, exercise, work, or just because they’re cute and comfortable. The challenging part is finding one that fits properly. Ready to wear sports bras often only come in basic sizes like XS, small, medium, large, and XL. While sizing like that may give an okay fit on some people, I think that it is unlikely to get a great fit with such limited sizing. Which is why I like making my own.

I started making GreenStyle Endurance Sports Bras this summer, and now have three, customized for my style. Funnily enough, none of them are made exactly per pattern directions with a front zipper and bound edges. What can I say? I’m no stranger to pattern hacking, and think it’s fun to try different looks by playing with a pattern.

The great thing about the Endurance bra pattern is that it has specific band and cup sizing. It’s designed to fit a full range of band sizes 28-40, and cup sizes B-H. You get a much better fit when you have cup size options! Speaking of fit, following the measurement chart is the best way to choose your size. My 32″ underbust (ribcage) measurement put me in a 32 band, and my full bust measurement put me in the E cup. The band is a good fit, but I neglected to take into account that the pattern cup pieces are intended to fit over bra foam pieces formed into cups, and I was not using the bra foam layer. So, the 32E sports bra fits, but it’s not snug. I don’t know about you, but I like my sports bras to fit snugly.

It’s still super cute, and I wear it all the time, but I knew that a 32D would fit better, at least with the way that I hack the pattern to use powernet basted to the wrong side of the main fabric, rather than using bra foam. So I made my second Endurance in a 32D.

As you may have noticed, beyond hacking the pattern to not use foam, binding, or a zipper, I also changed the straps. Rather than using the all one piece upper cup and strap, I trimmed the strap off about 3/8″ above where the strap starts. Since my bust is fuller at the bottom than the top, I also trimmed back the curve at the armscye.

I don’t show full pattern pieces out of respect for pattern designers hard work, but you can see where I trimmed off the strap and trimmed back the upper portion of the upper cup piece.

I thought it would be fun to have double straps, so I made straps out of 1-1/2 wide strips of fabric folded in half right sides together, zig-zagging over 3/8″ wide knit elastic that was aligned with the raw edge of the fabric, so that the zig just goes off the edge of the elastic and into the middle of the fabric, with the zag into the elastic, then turning the straps right side out and pressing.

The V and straight combination of straps is a unique look, along with providing additional support.

I basted two straps at center back, and placed the other two straps at 2-1/2″ away. After sewing the main and lining together along the top edges (except at the strap opening) and turning right side out, I tried the bra on to judge strap lengths. The center V straps ended up about 15″ long, and the straight straps about 14″ long. The length you need may vary depending upon the stretchiness of your elastic. I threaded the two straps on each side through sliders because it looked cute, and to give a slight amount of adjustability.

Aren’t the sliders a fun touch? And aren’t I lucky to have such a great wingman to ride along with me as I skate?

For my second Endurance I used size 32D, and again just sewed the center front together rather than using a zipper. For this version I made straps with 1″ wide knit elastic threaded through them.

Instead of skating around the neighborhood like I usually do, we decided to check out a county trail system. It was a workout with the little hills and elevation changes, but fun to have a change of scenery and to see the bicyclists and walkers that use the trail.

The trail is paved, and there are benches along the side every so often. It does cross quite a few busy streets though, so there are 4 way stops. You really have to watch for cars because they have a tendency to do more of a “rolling stop” than a complete stop.

The straps are just crossed in the back for a typical X back look.

Florida sun is intense, so don’t forget the sunscreen!

My new outfit (because of course I *needed* another outfit for skating) is an upcyle. I used some old capri length leggings and a workout top that was too big, unpicking them to salvage the pretty fabric. Working with limited fabric means that you’re going to get a scrappy look, but I tried to get intentional with it.

I managed to get the GreenStyle Moxi bike shorts front and back pieces, along with the Endurance Sports Bra cup pieces out of the capris. The old waistband fabric wasn’t as tall as the Moxi waistband, so the bottom 2″ of waistband was cut from the old teal workout top. Using the teal for the band of the Endurance bra gave it a nice contrast. I had to dig into my stash to cut the lining layer of the bra, along with the side panels of the shorts. The pockets were cut from the mesh panel that was in the center back of the old top. Like I said, it’s a scrappy look!

Looking scrappy (and happy) because I got to skate.

I love the support the bra offers, and the fact that it can double as a swim top. The V and straight straps are my favorite, so I used them on this bra too.

It’s fun to provide entertainment value by trying to take photos with cars occasionally driving by! 🙂 All you can do is laugh when someone rolls down their window and says, “Looking good!”

Reverse triple coverstitching helped soften the look of the multiple fabrics and bring them together. Superior Threads Sergin’ General thread in teal was a great match to the fabrics.

Don’t be afraid to upcycle, to hack, to adjust, to experiment, and to play with patterns and fabric. I also encourage you to rollerskate for fun and exercise. Even if it’s been a while, you’ll pick it back up. And like anything else, the more you practice, the better you get.

The details: I’m wearing the GreenStyle Endurance Sports Bra and the bike shorts from the GreenStyle Moxi Shorts pattern in all these photos. The navy and turquoise floral print is Align 2 fabric from GreenStyle.

Both the turquoise and purple shorts are supplex from Phee Fabrics.

The swirly print fabric used for the X back bra was secondhand fabric so I don’t have any information on where it’s from.

The rainbow finish sliders used on the double straps were purchased from Porcelynne.

You can make your own sports bra, and can customize it to fit your needs. It’s worth the sew! And a few more photos just because I have so many to share. 😉

Thank you for reading and sharing my love of creating, hacking, sewing, serging, great patterns, fabric, and making beautiful, well-fitting garments! ❤

The links to Greenstyle may be affiliate links, which means that at no extra cost to you, I may receive a few pennies if you purchase through my link. As always, I only give my honest opinion. After all, it is my blog, which represents me!

Are You Ready For A Treasure Hunt?

The Stitch Upon A Time Treasure Hunt Skirt, Options, Sewing Tips, And Upcycling!

I went on a treasure hunt as soon as I was notified that I was chosen to be a pattern tester for the Treasure Hunt Skirt. My husband has recently commented that I don’t really need to make myself anymore clothes, since my closet is pretty full. Well! OK, it may actually be pretty full, but it’s too full of ready to wear clothes that I rarely wear, and not full enough of comfortable, well-fitting clothes that I’ve made myself! So, it was off to treasure hunting!

Throwing away clothes that you don’t like, or that no longer fit is wasteful. I’ve donated many bags of clothes over the years, but I thought it would be more fun to upcycle a few things. The Stitch Upon A Time Treasure Hunt Skirt has SO many options! There’s a pencil skirt with or without a flounce, a hi-low pencil skirt with flounce, an A-line skirt, a hi-low A-line, and a pleated skirt! There are maternity options as well. So, where to start? I thought the hi-low pencil skirt with flounce sounded fun (and sexy), so that was my first make.

I upcycled an old swing dress that had a pretty print, but never got worn because the polyester spandex “scuba” fabric was a little too stiff to drape nicely as a dress. It may not have been flattering as a dress, but wow! It sure made for a fun skirt!

My husband’s reaction to this skirt? “Whoa baby, that looks **good**!” 🙂

The skirt is figure hugging, but not tight, the hi-low flounce adds a little bit of sexy sass, and is husband approved! 😉

The shaping over the booty is just right.

It makes me feel fancy, and looks great with heels. The hi-low hem is made a bit subtle with the fun flounce. As with most flounces, it’s basically a little circle skirt. You might dread hemming circle skirts, and I guess if your fabric doesn’t fray or curl, you could leave it unhemmed. But that is not how I roll. I like nice finishes, and the quality look you get from a nice hem. Here’s how I make it easy. I serge along the bottom hem of a circle skirt with the fabric right side up, using a 4 thread overlock, with a stitch width of M, a stitch length of 2 to 2.25, and the differential up to 1.3 or 1.5. This slightly “gathers” the edge so that when you turn it under there isn’t any excess fabric to cause lumps or folds in the fabric. I always use plenty of pins and my hem gauge to get perfectly even pretty hems.

You can see the inside of the pretty hem in this stance.

Since this upcycled fabric didn’t have as much recovery as I would have liked, and because I was working with limited fabric, I used a scrap from my stash for the waistband. Although the scrap matched quite well, it had a tendency to curl, badly. Ugh! I also wanted to ensure that if my granddaughter pulled on my skirt while playing, that she didn’t pull it down! So I decided to add elastic to my waistband.

To test my elastic length, I wrapped it around my low waist where the waistband would end up, and pulled it comfortably snug. This means that it felt tight enough to stay up, but not so tight that it gave me a “muffin top”. I made sure to exercise my elastic before testing the length (stretching it out 10-15 times). The length worked out to be 1-1/2″ to 2″ shorter than the suggested waistband length. Different brands and types of elastic have more or less stretch, so I always like trying the elastic on my body before sewing it into my garment. I overlapped the elastic by 1/2″ or so, and zigzagged all around the overlap. I also cut my waistband 1-1/2″ shorter so that the elastic and band would be the same length.

Having the curling fabric and elastic all perfectly aligned with a basting zigzag made is so much easier when I serged the waistband onto the skirt.

Then I folded the waistband over the elastic and ran a wide zigzag (length 2.5, width 3.0) along the raw edge of the waistband. I made sure that the elastic was 1/4″ inside the edge of the fabric so that it would be caught in the zigzag, but not cut when the waistband was serged on the skirt. This gave me a perfectly fitting waistband that will keep my skirt from being pulled down while playing with a rambuctious 3 year old!

With all the options the Treasure Hunt Skirt offers, I thought it would be fun to try a different style. Since the hi-low speaks to me, the A-line hi-low was it. I found an old maxi skirt in my closet and it had enough fabric to make my skirt and a cute top for my granddaughter. The polyester spandex ITY made such a fun, swishy skirt!

The A-line is full enough to flow and drape nicely over the body.

I made a slight change to the waistband on this skirt, by adding 2″ to the height. This made it 1″ taller than the original band. I played with a french tuck to show off the waistband.

Do I look like a flamingo in this pose? The fabric kind of makes me think of a Lilly Pulitzer flamingo print!

From the back the skirt just looks like a simple A-line.

But from the side you can really see the pretty hi-low effect.

Even though it’s a flowy skirt, the hi-low gives it a little bit of a sexy look.

I loved the look so much, that the next day, I made another hi-low A-line skirt. It was another upcycle, this time out of a jersey knit.

I love that the hi-low is shorter in front, but not **too** short.

I wasn’t sure that I’d like the jersey knit as much as the drapey ITY, but honestly, this might be my favorite skirt!

The cut of this skirt just gives such a pretty drape!

It seriously looks good from every angle!

It sure makes me feel pretty! And isn’t a pattern that flatters your body and makes you feel pretty a treasure in and of itself?

Are you ready to go on a treasure hunt and make yourself a new Treasure Hunt Skirt? It’s such a quick, yet satisfying sew! And with all the options available in one pattern, you can make yourself a variety of fun, comfortable skirts.

The details: These are affiliate links to the Stitch Upon A Time site and the Treasure Hunt Skirt. This means that at no extra cost to you, I may receive a small commission if you purchase through my link. As always, I only give my honest opinion. After all, it is my blog, which represents me! 🙂

The white top is a Titania Tunic tied in a knot. It’s my favorite way to wear this top! It also looks good with my Legend Leggings blogged here.

Thank you for reading and sharing my love of creating, sewing, patterns, fabric, and making beautiful well-fitting garments! ❤

Itty Bitty & Not So Itty Bitty Baby Dresses

My granddaughter needs play clothes for the summer, since she’s outgrown pretty much everything from last summer. Toddlers grow fast! So my daughter gave me some tops and dresses to upcycle. They were all XS or small, so children’s clothes would be about all that would fit on the fabric. I chose three coordinating fabrics, and got to work.

Using my rotary cutter, I trimmed along the side and sleeve seams, and ripped the clothes apart. A seam ripper was necessary to remove hems and binding as needed, to be able to lay the fabric out smoothly. It certainly would have been easier and faster to use yardage, but it was fun to think creatively how to fit my pattern pieces and make it all work.

I’ve made a couple of Made By Rae Washi Dresses blogged here, but hadn’t tried any children’s patterns. This is my latest (and favorite!) Washi Dress, made with a beautiful Art Gallery Fabrics border print called Roads to Flowerhouse.

While scrolling through the Made By Rae children’s patterns, I came across the Itty Bitty Baby Dress. It’s designed for wovens, but I knew that it would work to use knit fabrics.

The pattern calls for a simple gathered skirt, trimmed with bias tape. Since I was upcycling, had limited sized pieces of fabric, and had found coordinating fabrics, I decided to make a three tiered skirt instead. For the Itty Bitty Baby dress, instead of the suggested 9″ high rectangles of fabric, I cut my top strip 3″ high, and the second and third tiers 3-1/2″ high. Each tier was gathered and sewn to the tier above it, then the skirt was sewn to the bodice as per the pattern directions. Newborn sized clothes always look so cute!

There also happens to be an expanded size of the pattern in a size 3, which is the size my two year old granddaughter is growing into. It’s made the same way as the Itty Bitty newborn size, and it too got hacked to have a triple tier skirt. Instead of the suggested 15″ high skirt panels, the top tier was a 4-3/4″ high strip, followed by 5″ high strips for the second and third tiers. The toddler skirt is a bit more gathered, since Lila likes to run and play and climb and move.

Since the dresses were already bright and colorful, I thought that it would be fun to use variegated thread to cover-stitch everything. That’s the funny thing about having the ability to cover-stitch. You go a little crazy and fun and play around with it. On the toddler dress, I used a reverse triple cover-stitch to accent everything. To lessen the scale, I chose a narrow reverse cover-stitch for the newborn dress.

The Bummies pattern is from Brindille & Twig, with a ruffle added across the bum for a little extra fun. Because I already spend too much quality time with my seam ripper, I just couldn’t bring myself to rip off the leg bands that I accidentally sewed on inside out. So I just reverse cover-stitched over the seam allowance, and turned it into a “design element”!

Admittedly, these outfits are super bright and a bit wild, but that’s what makes them so fun! Normally, I wouldn’t post without modeled photos, but with the current state of the world, I don’t know when we’ll be able to visit our daughter and her family. Hopefully before the new baby is born! And this is as good a way as any to share that I’m going to be Grandma to another little girl! 🙂 ❤

Do you have some unworn clothes in your closet that could be turned into fun fabric for little ones? Consider upcycling them into to something new. There are so many cute patterns to try. And it’s fun to sew for my soon-to-be itty bitty baby, and not so itty bitty girl.

Stay well, and sew something that makes you happy!