The Aushui Tank Transformation

Transforming The Stitch Upon A Time Aushui Tank Into A Dress

I bought the Stitch Upon A Time Aushui Tank pattern because who doesn’t need a unique tank top in their lives?  The square cut neckline was a new look for me, and I love tanks with straps that completely cover your bra.  The pattern is a pretty quick sew, and the facings really help the tank keep it’s unique shape.  It also has options for a button placket and a tie front, which will totally change the look!

Rayon spandex from Phee Fabrics made for a soft, comfortable tank, with excellent drape.  I added two inches to the length because I am tall and like longer tanks.  But I certainly could have stuck to the pattern length and been just fine.

Aushui tankAushui back

Once I made the tank I started thinking that it would be fun to make the Aushui into a dress.  Not only are dresses a summer time staple, they also make it easy to get ready in the morning.  Wanting to keep the lines of the dress clean, a gathered seam at the waistline was out.  A simple fit and flare design fit the bill, so I pulled out the Stitch Upon A Time Calista pattern.  The skirt portion of the Calista flares out nicely, without being too full.

The hardest part of this pattern mash was determining where the skirt should start!  Fit and flare dresses look best when they are fitted through the bust area and flare out at or just above the natural waist.  A novice sewist may be surprised to learn that your natural waist isn’t necessarily at your belly button.  Tie a string, strip of fabric, or piece of elastic around your waist, and bend side to side several times.  The elastic will settle at your natural waist which may be above your belly button.

Lay the Calista skirt pattern on top of the Aushui Tank front, with the center folds aligned.   Slide the top of the skirt up to the bustline marking.  With the patterns taped together, cut out the front of your dress.  Align the Calista skirt the same way on the tank back, and cut out the dress back.  There will be a little area where the tank and skirt pieces intersect at a sharp angle.  Gently curve this area (where the purple arrow is pointing in the second photo) when you cut out your dress.

Aushui Cal tapeAushui Cal cut

Then follow the pattern tutorial for construction of view A.  The only difference will be the length of your side seams.  Take your time and use plenty of pins when folding up the hem.  That way you’ll get a nice even hem when you finish your dress.  Pro tip: sewing a line of stitches down the center of the back facing before construction will make it easy to tell the front from the back when you’re hanging up laundry or getting dressed.   If you have a vinyl cutting machine, a cute little HTV design would make a good “tag”

I used Phee Fabrics Tricot for my dress and absolutely love the drape and swing of my Aushui Calista pattern mash!  It’s a fun, flirty length, without being too short.  It only took two yards of fabric, and I have large enough scraps that I can probably make another swimsuit. 😉  You can read about my Water Faery and Scrundlewear bikini here.

Aushui CalistaAushui Cal full

I need more of these dresses in my life!  I’m so glad I played around with the patterns, and that my dress turned out even cuter than I imagined!  There’s no reason to be afraid of trying something new, and hacking and mashing your patterns.  You might just end up with a new favorite dress, or other cute clothing in your wardrobe!

 

*This post may contain affiliate links.  This means that at no extra cost to you, I may receive a small commission if you purchase through my links.  As always, I only give my honest opinion.  After all, it is my blog, which represents me!  Thank you for reading and sharing my love of sewing, patterns, fabric, and pattern hacking. 😉

 

Swimwear Shenanigans and Escapades

Hacking The 5oo4 Shenanigans And Escapade Into Fun Swimwear

Since I’ve decided that this is going to be the summer for swimwear sewing, I’m having fun combining and hacking my patterns to make some fun suits!  I like using all the fun colors of Tricot from Phee Fabrics, and always use their Powernet in my swimwear, bras and workout wear for extra support.

The 5 Out Of 4 Shenanigans Skort seemed like the perfect basis for a swim skirt.  Since the Escapade Top and Dress pattern has a drawstring front, I thought it would be fun to add drawstrings on the sides of the Shenanigans.  That way my booty could be covered while walking out to the beach, then I can shorten the skirt as much as I want while playing on the beach.

You can use the shorts included with the pattern, or your favorite briefs pattern for underneath.  If you use a different pattern for the briefs, make them first, without sewing the waistband.  Since my brief pattern has a lower rise, I traced the Sporty Spice length in my measured size for the skirt, and cut on the low rise line.  I didn’t want the sides to flare out too much, so I curved the side seam of the bottom of the skirt front in to the next smaller size.  When I lay the skirt front pattern on top of the brief pattern, you can see that the front waistline curve is the same, and that it’s a couple of inches wider than the brief.

Shen pattern FYou need that extra width to make your drawstring casing, and for your skirt to have a little bit of ease.  The skirt back should also match the curve of your briefs and have the same extra width.  Because I’m tall and have a booty, I added a little extra length to the center back of my skirt, tapering up to the side length.  It’s just enough to cover my bum when the skirt isn’t gathered up on the sides.  Sew the skirt front and back right sides together with a 1″ seam.  Make drawstrings by cutting four 1-1/2″ wide strips of fabric twice as long as the side seam of your skirt.  Fold each strip right sides together and using a stretch stitch sew with a 3/8″ seam allowance.  Use a safety pin or bodkin to turn the strips right side out.

Shen ties

Fold the skirt side seam allowances under 3/8″ and pin in place.  Stitch in place using a 1/2″ seam allowance to form the casings for your drawstrings.

Shen casingFold the bottom hem under 1/2″ and use a zig zig or other stretch stitch to hem.  On the right side of your skirt, make a small horizontal slit in each casing, about 3/8″ above the hem.  Thread a drawstring in each casing and tack the drawstring in place at the top.

Shen insert tiesAlign the center front, center back, and side seams of your brief and skirt and pin or clip in place.   Try it on to ensure everything feels comfortable and lines up nicely.  This is your opportunity to trim the rise a little bit if needed for better alignment.   Easing the skirt to fit the brief, baste them together.  Then sew on your waistband and elastic and you’ve got a new swim skirt!

I’ve hacked the 5oo4 Escapade into a workout top before, so I knew it would make a great bikini top.  I thought it would be cute to have a little cut-out in the back, although due to changes I made after basting the side seams and trying it on, the cut-out is smaller than I’d originally planned.  I used Tricot as the main and lining fabric, with a layer of powernet basted to my main fabric so that it will end up sandwiched between the layers.  (Following the pattern tutorial and basting it to the lining fabric will save you from having to snip through two layers when making your opening for the drawstring!)

Because adding an underbust band to accomplish the cut-out added length to the top, I ended up shortening and altering my front and back pattern pieces to show a little more skin.  I wanted the back bodice to end up 3″ high, so my pattern piece ended up 3-3/4″ high, with a 3/8″ seam allowance at the top and bottom.  (I did not have my strap drawstring go through the bodice back.  If you want yours to go all the way through, add 3/8″ to the height, since the top will be folded under 3/4″ to form the casing per the pattern tutorial.)  Simply fold up the bottom corner of your pattern piece along the center back fold line to get the triangular cut-out.

Esc cutout back

I cut the front bodice on the C/D cutline, because according to the measurement chart, that’s where I should cut.  I definitely need the extra length in the center front, but not so much at the sides.  So I ended up tapering my bodice height starting 3-1/2″ away from the center front angling up to the necessary side height of 4-1/8″ to match up to my bodice back.

Esc front angle

To make my straps, I followed this blogpost from Emerald Erin.  Basically, you cut your fabric four times the width of your elastic, (in this case 1-1/2″ wide).  Fold the straps in half right sides together.  Place the 3/8″ elastic flush with the cut edges, then zig-zag the elastic, right at the inner edge of the elastic.  Then turn your straps right side out.  Take your time when stitching on the elastic, and the straps will end up nice and flat.

Esc strap elasticSew the bodice front per the pattern tutorial until you reach the point where you are supposed to sew the front to the back at the side seams.  This is when I tacked my straps at the side seams, rather than having one long strap run through the entire top of the bodice.  Note: in the photo below, I had not yet made the tapered cut at the bottom sides of my top.

Esc bodice front

Lay the bodice backs right sides together, and stitch along the top using a 3/8″ seam allowance.  Stitch along the triangle cut-out.  Sew elastic to these seam allowances, keeping the elastic taut, but not pulling on it.  This will give these seams stability, and help keep the top of your suit in place.  It might seem intimidating to sew elastic, but it’s not as scary as you may think.  In fact, 5 Out Of 4 Patterns has several blog post videos showing how to add elastic in their Sewing School series.  In the photo below, you can see where I added the elastic.  Note: The bottom of the back hadn’t been trimmed to it’s shorter height yet.

Esc back elasticYou’ll need to poke one side of the back through the narrow space at center back to turn the back right sides out.  Then it’s time to sew your side seams.  I hate bulky side seams, and with the straps, and elastic, and layers of fabric and powernet the seam could get bulky!  So I do it a little differently than you may have seen.  Since the front strap casing is folded down at the top front, my normal method of sewing the main front to main back, and lining front to lining back, lining up the top seam isn’t going to work.

So I folded the back bodice over the front bodice, aligning the seam with the top edge of the front bodice, making sure that the main fabric front matched up with the main fabric back, and the two lining fabrics were together.  Stitch down 3/4″ until reaching the casing stitch line.  Then pin the main fabric front to the main fabric back and the lining front to the lining back and stitch each of the pinned seams together.

Esc side topEsc side pin

Then clip the seam allowances so that you can press them open.  I also clip the top corner at an angle to help reduce the bulk.  Repeat these steps on the other side seam.

Esc side clip

Cut a band the same width as your bikini top, adding in a seam allowance.  If you use 3/4″ elastic, the band should be 2-1/4″ high (twice the width of the elastic plus the seam allowance).  Sew the short ends of your band together, and aligning the seam with one of the side seams, place the band over the bodice right sides together.  Pin the band to the bodice bottom, then stitch.

Use pins to mark the center front and back, along with the quarter points.  Overlapping the ends of your elastic 1″, zig zag  together, then mark the quarter points with pins.  With the band still folded up on the bodice, pin the elastic to the seam allowance, aligning the quarter point pins.  The edge of the elastic should line up with the seamline, and hang down below the bikini top.  Then wrap the band down around the elastic and overlapping up to the inside and pin in place.  Stitch around the bodice bottom using a zig zag set at 2.5 stitch length and 3.0 stitch width.  At the triangle cut-out opening, stitch across the band at the top and trim away the excess fabric.

You can either tie the straps at the neck halter style, or have someone help you pin them in a comfortable spot and tack the straps in place, cutting off the excess strap length.  Now you have a cute new swimsuit!  I love being able to adjust the drawstrings to make the skirt as short or long, and the top as high or low as I want.

ShenEsc frontShenEsc down front

Because it’s boring and awkward to try and look sexy, I decided to have fun doing cartwheels instead.  🙂

ShenEsc cart frontShenEsc cart back

Being able to laugh at yourself and act silly keeps you young, right? 😉  There is no need to be afraid of sewing swimwear.  Have fun with it and mash and hack away!  It’s just another pattern and some colorful fabric, customized to fit YOU!  Does sewing your own swimwear give you super powers?  Maybe not.  But it does give you the confidence to see if you can still do cartwheels!  So sew away and then hit the pool, lake, or beach.

 

*This post may contain affiliate links.  This means that at no extra cost to you, I may receive a small commission if you purchase through my links.  As always, I only give my honest opinion.  After all, it is my blog, which represents me!  Thank you for reading and sharing my love of sewing, patterns, fabric, and pattern hacking. 😉

 

 

 

 

 

Happy Father’s Day!

Happy Father’s Day to my sweet husband, and to all the Dad’s I know.  Thank you for being such a great partner on the journey of parenthood.  From the moment our babies were born, it’s been super obvious how much you love them, and how much they love you.  You’ve been an inspiration to them, as well as a teacher of how to live, how to laugh, how to dive in and fix things, build things, keep trying, live fearlessly, speak your mind, be a gentleman, be a kind, loving, and wonderful human being.

Thank you for being a wonderful husband.  Our children have (and in 8 months) will have successful marriages by hopefully following the example we have tried to set.  Thank you for being my rock, for tolerating my sewing habit :-), for having the good grace to take photos of my creations for this blog, even when I get giggly about modeling.  Thank you for having fun while modeling the shorts I made you, for making me laugh, for being my best friend and true love.

Thank you for knowing how important our faith is, for letting it be the foundation in our life and marriage.  Thank you for being the shining light of love that you are.

I love you,

D

 

Stitch Upon A Time Water Faery Twist & Swim Top

Swimsuit And Workout Tank With Pockets Hack

Summer has arrived, so it’s about time for me to get started on sewing up some swimwear!  When the Stitch Upon A Time Water Faery swim patterns were released, I eyed them closely, but put off buying a pattern because I couldn’t decide which one to buy.  The Retro One Piece has a dress option, which I love the look of!  But I never wear one piece swimsuits.  I finally settled on the Twist & Swim Top because I knew I would wear the sexy yet modest top and could play around with the pattern.

The swim top has the option of a plain or twisted front.  Since I was making the fun twisted front, I decided to follow the pattern exactly for my first version to see how it fit.  I made my measured size, using the green extended cut line for the bodice, since I have the noted 4.5″+ difference between bust and under bust, and followed the tutorial.  As I’ve come to expect from Stitch Upon A Time Patterns, the tutorial is well written, with lots of photos to help you visualize each step.  The elastic measurements are perfect, exactly the right length for support and comfort.

I had some swim fabric from JoAnn’s in my stash that was left over from a project I made last year.  There wasn’t quite enough fabric to make the straps the recommended width, so I made them as wide as possible, but had to omit the gathering on the straps.  As experience has taught me when making bras or tops that need support, I used powernet in the front and back bodice pieces, as well as the straps.  The resulting top is cute, and works great for walks on the beach, but had one small problem.

Knowing that my shoulder to bust apex measurement is longer than average, I should have taken that into account and lengthened the straps.  Since the straps are too short for my body, the top cuts into my armpits a bit.  Because the top is held firmly in place under the bust in front, the back is pulled forward and up, which keeps the back from laying properly.  Fortunately, it’s a simple fix.

TT p frontTT p back

I just added an inch to the strap length before cutting out my next version.  This time I used Tricot from Phee Fabrics.  I think the hardest part was narrowing down which colors to use, since it’s available in so many pretty colors!  Because I liked the way the narrower straps turned out, I decided to cut them at 3.5″ wide again.  I also decided to play around with the bottom band construction, to use one piece of 1.25″ wide elastic in the band, rather than elastic at the top and bottom seams of the band.

I made the top as directed until I got to the band.  I sewed the bands right sides together, along the bottom edge.  I marked the band at the midpoint, then marked the quarter point by folding one end over and 1/2″ past the center pin, to account for the 1/2″ seam allowance.  I also placed pins on either side of my center front pin to mark the V placement.  I stitched between the two outer pins, using a 3/8″ seam allowance.  (Note: I used a 3/8″ seam allowance on the top and bottom seams of my band so that I could use  1.25″ sport elastic.  You can also stick to the 1/2″ seam allowance and use 1″ wide elastic.)

TT band pin

Then I carefully cut down to, but not through the stitching at both ends of this V stitching, and turned the band right sides out.  Because I would need an opening to thread my elastic through the band after I attached it to the bodice, I had to carefully plan out stitching the short ends together.  Placing the short ends right sides together, I stitched from one side for 1/2″.  Then I stitched from the other side to just past the bottom seam.  This left me enough opening to thread my elastic through, but ensured that the side seam was completely sewn on the outer side.

TT band end

I turned the band right side out and basted the long edges together.  When sewing the band and bodice together, make sure that the opening for the elastic ends up on the inside of your top!

TT band

Then I matched up the center front, center back, and the quarter points of the band and bodice, right sides together.  Keep in mind that the quarter points may not exactly line up with the side seams, especially when you use the extended bodice cut lines.  Stitch the band and bodice together and insert the elastic.  Use the recommended underbust elastic length, and overlap and stitch the ends of the elastic together.  You can stitch the opening on the inside of the band closed if you want, but since tricot doesn’t fray, I didn’t bother.

Yay!  I had a perfectly fitting swim top!  Now for some bottoms.  I’ve owned the Scrundlewear 2.0 pattern for months, but had never made a pair.  Since everybody seems to love Scrundies, I figured they would make great swim bottoms.  I cut on the foldover waistband line, tapering in at the top following the side seam cutline to give me a high waisted look.  The front height was great, but the back was too high.  I tapered from 1-5/8″ down at center back over to the height of the front side seam.

The legs felt too low, so while wearing the bottom, I carefully pinned where I wanted the leg line to end.  I added in the 3/8″ seam allowance I was going to use for turning my swim elastic under, marked my pattern, and cut off the excess fabric.  The photo below shows how much fabric I cut off compared to my new higher leg cut line.

Scrundies leg

I also cut a front and back out of swim lining.  And as you can see, the swim lining from Phee Fabrics is nothing like the stuff I’ve bought from JoAnn’s.  It’s soft and lays smoothly.  The edges don’t curl up, and it’s super easy to sew with!  I also cut a front piece out of powernet.  Hello tummy control!  Not only is powernet great for bras and swim tops, it works fabulously to smooth out the tummy and hold everything in place.  Baste the powernet to the fabric front, and sew the front and back together at the side and bottom seams.  Sew the swim lining front and back together as well.  Place the swim lining layer inside the fabric layer wrong sides together, and baste at the leg and waist openings. Using a zig zag stitch, sew the elastic on the inside of the leg openings with the elastic lined up with the edge of the fabric.  Turn the fabric under and top stitch using a zig zag with the stitch length set to 2.5, and the stitch width set to 3.0.  This will give you a professional, even finish.

I used a strip of 2″ wide fabric to make my waistband.  I sewed the two short ends right sides together, then layered the swim bottoms and waistband, right sides together, with 3/4″ knit elastic on top.  I stitched through all three layers, using a 1/4″ seam allowance.  This was easier than anticipated, since all three layers were the same length.  I didn’t have to worry about stretching or pulling.  I flipped the waistband open, and carefully folded the waistband fabric around to the inside and pinned it in place.  Using the same zig zag settings, I topstitched the fabric in place just below the waistband.

scrundiesMy Scrundie swim bottoms were a success, and I have a cute new swimsuit!  I love that it’s modest enough, while still being sexy.  My husband definitely approves of my creation!

TT suit frontTT suit back

Since I seem to think that every bra or swim top can be made into a workout top, read the 5oo4 Escapade Experiment, Hack At It, and the GreenStyle Power Sports Bra Workout Top Hack as proof of my workout top obsession! 🙂  I decided to make the Water Faery Twist Top into a workout top too.  I made the Twist & Swim Top out of Tricot, per directions (with the narrower and longer straps out of Supplex) through to basting the completed bodice layers together along the bottom.  Then I got to work on the tank portion.  Supplex is my absolute favorite fabric for workout wear, so that’s what I used for the tank.  The pattern includes a tankini option, but since I was making a workout top rather than a swim top, I didn’t want the negative ease that the swim top has (to keep the tank from floating up while in the water).

If you have a well fitting tank pattern, you can use that, or you can just trace the tankini piece wider, with a gentle slope down to the bottom, rather than with the inwardly shaped waist curve of the original.  I thought it would be fun to color block a stripe down the center back, and add some pockets to the front for practicality and a pop of color.  I cut a strip of tricot 4.5″ wide by the length of the center back tank piece.  Then I folded my tank pattern piece in 1.5″ at the center back.  That way, when I cut out the two back halves (not on the fold), I would be missing 3″ from the center back.  Sewing the strip to each of the back pieces right sides together, with a 3/8″ seam allowance meant that the color-blocked back ended up the same size as my tank pattern piece.
TT wo back stripeI cut out two 4-3/4″ x 7-1/2″ rectangles for my front pockets.  I wanted them to be hidden seam pockets like the one I did on the GreenStyle Jillian Tank.  I laid the pocket pieces on the tank front and marked the 3/8″ seam line at the top and bottom of the pocket with a pin.  I flipped the pocket toward the center, and with right sides together, pinned the pocket to the tank, then stitched 3/8″ in from the pocket edge.

TT wo pocket pinI flipped the pockets back to the outside edges after stitching and basted them in place.

TT wo pockets.jpgAt this point, I should have been able to sew the tank front and back together, and sewn the bodice to the tank.  But I had made a couple of rookie errors. 😦  The first was that I had made the tank too wide at the top.  This was easily remedied by angling the tank in at the top so that it was the same width as the bodice (and the original tankini pattern piece.)  The second error was not considering the fact that I am tall, and should have added an inch to the length of the tank.  The problem was remedied easily enough by adding a band.  I cut out the band pieces, and sewed them onto the bodice per the pattern tutorial, except using a 3/8″ seam allowance, and spacing my bodice front center V only 1/2″ apart.  I don’t want to show too much skin at yoga class!

Because the 1.25″ wide sport elastic had worked so well on my swim top, I decided to use it for my workout top as well.  With the bands still folded up on the bodice, I used pins to mark the quarter points on the top, and a pencil to mark the quarter points on the elastic, and stretching to fit, stitched the elastic to the seam allowance.  I had the elastic lined up with the stitching line, and hanging down below the bodice.  Then I folded the inner band down, and stitched the elastic to the band.

TT wo elasticI brought the outer band down and basted it in place before attaching the tank portion.  I sewed on the tank, hemmed the bottom, and I’ve got a cute new workout top!

TT wo frontTT wo back

Everything stayed perfectly in place during a sweaty Vinyassa Flow class that included inversions.  Everyone in the lobby when I walked into the yoga studio commented on my top.  None of them could believe that I made it, including the instructor, who knows how to sew.  I went for a walk later in the evening, and the pockets worked great to hold my phone and house key.  It looks like I’ve got a great new swimwear and workout top pattern to add into my rotation!

 

*This post may contain affiliate links.  This means that at no extra cost to you, I may receive a small commission if you purchase through my links.  As always, I only give my honest opinion.  After all, it is my blog, which represents me!  Thank you for reading and sharing my love of sewing, patterns, fabric, and pattern hacking. 😉

 

 

 

 

Sewing For Men, Episode 2

GreenStyle Men’s Hampton Shorts

I don’t often sew for my husband, and that’s unfortunate.  Like most sewists, there are so many projects on my never-ending list, and so many patterns I’d like to try, that I don’t seem to get around to sewing for him very often.  When I showed him the GreenStyle Hampton Shorts pattern (on sale for $8.50 for the month of June 2019), he said, “I’ve been thinking about buying a couple pairs of shorts like that!”  So I knew that it was something that he wanted and would wear.  Then came the more challenging part- convincing him to let me photograph him wearing the shorts.  He knows that that is part of the deal.  He’s taken enough photos of me in my makes to know that I like to share what I sew, whether in a Facebook sewing group or on my blog.  Surprisingly, he agreed pretty quickly, so I knew he really wanted the shorts!

He wanted the shorts to fit like his favorite pair of RTW gym shorts.  So I measured his waist to choose a pattern size, and grabbed the shorts to compare to the pattern.  I noticed something interesting about the gym shorts- the back of the shorts was much larger than the front.  Unlike some men with a flat butt, my husband has a booty.  Hmmm… so perhaps that explains why he likes the fit of that particular pair of shorts.  (That, and the fact that they are a little bit shorter than the rest of his workout shorts.)  He also isn’t a fan of low rise pants or shorts.

Armed with this information, I traced out the pattern, with a few modifications.  His measurements put him in a size Large.  So I traced the back pattern piece in a size XL.  I traced the front pattern piece in a size Medium, but used the rise of the XL to keep them from being too low in the front.  Since this was an experiment, I used some old 2-way stretch cotton jersey that’s been in my stash forever.  Since most knit patterns nowadays call for 4-way stretch, my old 2-way stretch fabric has just been stashed in a drawer.

The pattern is easy, a front, a back, a waistband and pockets.  What makes it look nice is the top-stitching.  It always gives a garment a nice finished look.  Since the old jersey fabric had questionable recovery, I wanted to make sure that the pocket openings didn’t get stretched out and floppy.  So I cut a 1″ wide strip of interfacing and ironed it on to the edge of the pocket lining where the lining attaches to the shorts front.  To avoid any stretching, I made sure to stitch with the interfaced pocket linings up when sewing them to the pants fronts.  It worked perfectly, so I did a double row of topstitching to accent the pockets.  As per pattern directions, I also topstitched the side seams, which gives them a stylish, finished look.

Hampton tan pocket

The shorts sewed up pretty quickly.  I made buttonholes for the drawstring, sewed the elastic casing, and attached the waistband to the shorts.  My husband picked out the fun camouflage looking paracord to use as the drawstring.  I enlisted his help to melt the cut ends to keep them from fraying.

Hampton tan sideHampton tan back

Since my husband is not tall, I had taken an inch off the length when cutting out my pattern pieces.  They still ended up too long for his liking, so I cut off another inch and a half and hemmed them up.  The shorts were a success and looked good from every angle, so I knew I was good to go on making another pair.

I had some Twill Polartec Powerstretch left over from the Patterns for Pirates SOS pants I made for our daughter, blogpost here.  I knew it would give the shorts a dressier look, making them even more versatile.  The fabric is thicker, with a nice 4-way stretch.  To keep the pockets trim, I used a scrap piece of woven cotton for the pocket linings.  The blue coordinates well with the gray twill.  It is also my husbands favorite color, because, as he says, “It matches my eyes.” 😉

Hampton pocket lining

Since the cotton woven also stabilized the pocket, I didn’t bother with the interfacing at the pocket lining edge this time.  The shorts sewed up just as quickly, and obviously my husband loves them and had fun modeling for me. 🙂

Hampton gray muscles

Having used two completely different fabric types and weights, with stretch at the opposite ends of the spectrum, and getting great results each time, this pattern is a winner.  Having added to the rise, I would feel comfortable making it in a board short type fabric with only minimal stretch.

I really need to order some more Stretch Twill from Phee Fabrics and make him more Hampton Shorts.   Should I get charcoal, black, or more of the navy like I used for my tunic dress?  Father’s Day is right around the corner, and since he is a great Dad, he deserves some more cute and comfortable shorts!

 

*This post may contain affiliate links.  This means that at no extra cost to you, I may receive a small commission if you purchase through my links.  As always, I only give my honest opinion.  After all, it is my blog, which represents me!  Thank you for reading and sharing my love of sewing, patterns, and fabric. 🙂

Wandering Back Into Wovens

When I first learned to sew, it was with woven fabric.  I think most people start out using wovens either because that was the type of fabric their Mothers and Grandmothers used and taught them with, or because they gravitated toward garment making after learning to quilt.  I made myself plenty of cotton woven clothes in my teens, and so many pretty dresses for my daughter when I was in my twenties.  I also recall making a bathrobe for my husband (with tons of piping) and a dress shirt for my son (all those buttons and buttonholes!)  But sewing with knits seems so much easier and forgiving, so I had completely switched over to knits and didn’t look back.

Then two things converged that has me wandering back into wovens.  Phee Fabrics started carrying stretch twill, which intrigued me.  A local sewing store held The Tunic Bible workshop, which sounded sort of fun.  And it would have been fun, but it was way out of my budget range, so I put it out of my mind.  But then I started seeing the dresses the women made at the workshop on a Facebook sewing group I belong to.  And I needed the pattern!

It’s totally my style- a simple and straight-forward design, yet with the opportunity to personalize.  So I looked for “The Tunic Bible”, by Sarah Gunn and Julie Starr at a couple of local stores and neither had it in stock.  I probably should have driven to the closest bookstore, but it was easy enough to order the book online.  ISBN 9781617453564.  The pattern is included in the book as two large copy shop sized pages printed front and back.  I traced the basic tunic and all the placket options in my size, dug through my 25 to 30 year old stash of wovens for fabric to use as my muslin, and got started.

The book is kind of a “look book” with lots of photographs of the tunics to give you inspiration, and includes directions for basic tunic construction and for each of the placket options.  It recommends finishing your seams with French seams to give your tunic a more couture finish.  I chose to use flat felling on my shoulder seams, as it seems easier/cleaner to me.

I made a sleeveless tunic length top with a wide split placket as my first muslin, and like the basic look.  However, it was immediately obvious to me that it is too wide across the shoulders in the front.  Frankly, it’s too wide even if I were adding sleeves, even though I had traced on the sleeveless line.  Despite yoga class and trying to have good posture, years of deskwork and hunching over a computer have taken their toll and given me forward rotated shoulders.  While wearing it, I placed a row of pins in my top where I wanted the shoulders to end.  After taking it off, I laid the pattern on my shirt and marked my new cut lines adding in the seam allowance.

TB turq topTB turq side

Thinking that I had solved my fit problem, I moved on to a dress length muslin using the V-neck placket.  Although the pattern includes all the plackets, the tunic is NOT marked with all the neckline cuts.  You are expected to match up the center lines and shoulder seams and trim away the excess fabric on the front and back bodice after sewing on the facing.  If you are an experienced sewist, it’s easy enough to do, although it can feel nerve-wracking to not know for sure that you are cutting it properly.  This could be a bit overwhelming to someone that is just learning to sew.

Trying on the dress revealed my second fit issue.  The bust darts are not in the proper place for my body.  I am longer than average from shoulder point to bust apex.  This fit issue should not have been a surprise to me, since I frequently have to adjust patterns because they cut into my armpits.  Since knits are so forgiving and most knit patterns don’t have bust darts, I didn’t really think about the bust dart.  As you can see in my dress, the bust darts are way too high and too far apart.  Since that puts the fullest part of the bodice above my bustline, there is a bit of pooling there.

TB V dressTB V side

So I did a bit of research online to figure the best way to lower a bust dart.  I had determined the amount I needed to lower the bust dart by measuring from where the dart fell on my body, down to the bust apex, and ended up with an inch difference.  I also decided to make my bodice a size smaller, since my measurements put me between sizes and I had traced out the larger size.  A couple of sites recommend just cutting out the bust dart section of your pattern, moving it down to where you want it, and filling in the cut out section with paper.  Since I always keep my master patterns intact and trace out the size I need, I decided to move my pattern piece up an inch on the master pattern and trace the bust dart and smaller size bodice.

TB bust dart

I finally felt confident enough with the pattern to cut into my navy stretch twill and make a dress.  I loved the look of the wide split placket on my top, so decided to use it again.  The Tunic Bible recommends using petersham ribbon or bias tape for trimming your tunic, but since I had a vision of the look I was going for, I had ordered three colors of stretch twill and made my own “bias tape”.  Here’s where the beauty of stretch twill comes into play.  On my muslin top and dress, I had cut strips of fabric on the bias to trim the arm openings, etc.  Since stretch twill has spandex in it, and 10% stretch, I didn’t have to cut my trim on the bias!  I used Wonder Tape (a wash-away double stick tape for fabric) to hold my trim in place on the placket while I top-stitched it, and let me tell you- it is a total game changer.  I used to pin all my trims or pockets in place, then sew and hope that things didn’t shift or get a weird bubble from the pins.  Wonder Tape is awesome and so much easier.  I highly recommend trying it.

I love how my first dress turned out!  It reminds me of a dress my Grandma used to have when I was a little girl.  She was rather stylish, and very beautiful, and an all-around wonderful person.  ❤  I miss her so, and wish I had a photo of her in the dress I remember.  I swear a photo exists, but my Mom didn’t recall it.  Sigh.  Anyway, I have a beautiful new dress that reminds me of her, and I will wear it all summer long!

TB navy fullTB navy back

I decided to go with a solid color for my next dress, and used the ruffle neckline.  This is an unusual choice for me because I don’t “do” frilly.  Lady-like, yes.  Girly and frilly, nope!  I’ve put ruffles on the bummies I made for my grand-daughter, but what looks cute on a baby or toddler doesn’t equate to looking cute on me!  I don’t know what possessed me to try it, but I actually like the end result.  The coral stretch twill is so bright and summery, and it looks like something I would wear to a cocktail party.  (If I were one of those people who throws or gets invited to a dressy cocktail party, which I’m not. :-))  But I feel pretty in it and will probably wear it to my nephew’s wedding this summer.

TB coral standTB coral sit.jpg

I’m happy to have wandered back into wovens, and all it took was the intrigue of a new fabric and a few Facebook posts to do it!

Now I’m contemplating what other woven patterns I have to play with.  I bought a yard of the white stretch twill, and hope I have enough left to make a GreenStyle Havana top out of it.  I made a maxi length Havana out of some random gauzy fabric in my stash about a month ago, and liked it.  I think the stretch twill will flow just as prettily.  Are you ready to wander into wovens?

Havana leftHavana back

 

*This post may contain affiliate links.  This means that at no extra cost to you, I may receive a small commission if you purchase through my links.  As always, I only give my honest opinion.  After all, it is my blog, which represents me!  Thank you for reading and sharing my love of sewing, fabrics, patterns and creativity. 😉

 

 

 

The Positive Side

Sometimes when Dan and I go for a sunset walk, we know that we’re unlikely to see a pretty sunset.  It may be an overcast cloudy day, or the skies are just gray and misty looking.  Sometimes there is a large bank of clouds blanketing the horizon, so you know that the sun is unlikely to make an appearance.

That doesn’t stop us from walking, feeling the breeze on our skin, enjoying the sound of the waves, and breathing in the fresh salt air.  It is therapeutic to walk out in nature, to absorb the beauty of God’s creation.  Occasionally we’ll feel the need to quicken our pace, to hurry and try to “beat” an approaching rain shower.

rain cloud 5-1-19

We usually make it home long before the rain hits.  Once in a while we are treated to a little shower when we have gotten too far from the park entrance and can’t make it back in time.  Sometimes we’re pleasantly surprised when the sun peeks out or drops below  a bank of clouds and we actually get to see the sun set.

sunset 5-8-19

When the world seems to be swirling around you, and you feel a bit overwhelmed, where do you turn?  Are you grounded in your faith?  Do you know, honestly know and trust that it will all be ok because God really is in control?  It can be hard to do, because we like being in control, feeling like we have power over our world.  And we do, because of free will.  We choose the paths we take and are responsible for the consequences of our actions.  That doesn’t mean that we shouldn’t have faith, and trust and lean on God, Jesus, the Holy Spirit, to help and guide us.  It’s more that when we feel overwhelmed that we do turn to God as our first line of help and support.

It can seem easier to turn toward the world, to hear that it’s not our fault, to “drown our sorrows” in unhealthy ways, be they alcohol, drugs, bad and dependent relationships, or whatever other source of fleeting pleasure, yet long-term sorrow or pain that we burden ourselves with.  Know that you can always change.  You can always open your heart, and let God in.  There is always room for healing, for forgiveness, for moving forward into the light.  You can let go of the burdens that you’ve been trying to carry on your own.  They really do become lighter when they are shared.

Open your heart, listen, and pray.  Look for the light and the beautiful sunsets.  God is always there, always waiting and calling out for you.

sunset 4-24-19